Технические Паспорта & Разрешения К Использованию

with 20% glass fibres reinforced, halogenfree flame retardent polyamide 6 injection moulding grade for the electronic industry, heat stabilized

with 30% glass fibres reinforced, halogenfree and free of red phosphorus flame retardent polyamide 6 injection moulding grade for the electronic industry

Impact modified PA9T injection moulding grade with 30% glass beads

PA6 injection moulding grade with 30% glass beads, electrically conductive, reduced shrinkage

Tribologically modified PA9T injection mouling grade with carbon fibres, graphite and PTFE

Easy flowing PA6 injection molding grade, 30% glass fiber reinforcement, flame retarded without halogens

30% glass fibre reinforced Polyamide 66 injection moulding grade with a 20% of post-industrial recycled content, Heat stabilised.

30% glass fibre reinforced Polyamide 66 injection moulding grade with a 20% of post-industrial recycled content, high heat stabilised.

15% glass fibre reinforced Polyamide 66 injection moulding grade with a 30% of post-industrial recycled content, Heat stabilised.

Polyamide 66 injection moulding grade with a 30% of post-industrial recycled content, toughened and heat stabilised.

50% glass fibre reinforced Polyamide 66 injection moulding grade with a 30% of post-industrial recycled content, Heat stabilised.

30% glass fibre reinforced Polyamide 66 injection moulding grade with a 30% of post-industrial recycled content, Heat stabilised.

Polyamide 66 injection moulding grade with a 30% of post-industrial recycled content, Heat stabilised.

PA6 injection molding grade, reinforced with 15% of glass fibres, heat and uv stabilized. Containing 20% of PIR , post industrial recycled material (GK3)acc.to VW 50026.

PA6 injection moulding grade, heat stabilized, containing 30% of Post Industrial Recycled material.

PA6 injection molding grade, reinforced with 50% of glass fibres. Heat stabilized. Containing 30% of GK3 recycled polymer acc. to VW 50026.

PA6 injection molding grade, reinforced with 30% of glass fibres. Heat stabilized. Containing 30% of recycled polymer.

PA6 injection molding grade, reinforced with 15% of glass fibres, heat stabilized. Containing 30% of PIR , post industrial recycled material (GK3)acc.to VW 50026.

Easy flowing PA6 compound for injection moulding and extrusion, containing 40% post industrial recycled material

PA6 injection moulding grade. Impact modified and heat stabilized. Containing 30% of Post Industrial Recycled material.

PA6 injection molding grade, reinforced with 30% of glass fibres. Containing 30% of recycled polymer.

with 25% glass fibres reinforced, halogenfree and free of red phosphorus flame retardent polyamide 6 injection moulding grade for the electronic industry

Easy flowing, halogen free flame retardet PA9T injection moulding grade reinforced with 30% glass fibres for electronics

flame retardent (red phosphorus), 25% glass fibres reinforced and heat stabilised injection moulding grade with excellent electrical properties

with 40% carbon fibre reinforced polyamide 66 injection moulding grade

Polyamid 6 grade for extrusion; halogen free flame retardant system; highly heat stabilised

with 20% glassfibres reinforced, halogenfree and red phosphorus free flame retardant polyamide 6 injection moulding grade

unreinforced, impact modified, halogenfree flame retardant polyamide 12 extrusion grade for railway applications

with 10% glass fibres reinforced, halogenfree and free of red phosphorus flameretardant, plasicised polyamide 6 injection moulding grade with excellent flowability and very good elongation

unreinforced injection moulding grade based on polyamide 9T, with superior chemical resistance

PA6 injection molding grade, reinforced with 30% of glass fibres. Heat stabilized. Containing 30% of recycled polymer.

Easy flowing, heat stabilized PA12 injection molding grade, 25% glass beads, low warpage

PA6 injection moulding grade with 30% glass fibre reinforcement, flame retarded without halogens, heat- and UV stabilized

Easy flowing blend of PA66 and a partially aromatic polamide, 50% glass fibers, for part with high strength and surface quality, suitable for metal replacement

Polyamide 6 injection moulding grade for short cycle times

30% glass fibers reinforced, heat stabilized injection moulding grade based on a polyphtalamide

unreinforced, impact modified, halogenfree flame retardant polyamide 12 extrusion and injection moulding grade for railway applications

with 35% glass fibres reinforced, heat and hydrolysis stabilized polyamide 66 injection moulding grade

Polyamid 6 grade for extrusion and injection moulding; flame retardent; halogen free

PA66 injection molding grade, super toughened also for low temperatures, UV and heat resistant

high viscosity PA6 grade, suitable for extrusion

lubrified and tribologically modified PA66 injection moulding grade with 15% carbon fibres

Light-flowing, microcrystalline PA66 standard injection moulding grade for short cycle times

with 30% glass fibres reinforced polyamide 6.6 injection moulding grade, lubricated with PTFE; heat stabilized

with 30% glass fibres reinforced polyamide 9T injection moulding grade

35% glass fibre filled PA9T grade with improved hydrolysis and coolant fluid resistance

Easy flowing, halogen free flame retardet PA9T injection moulding grade reinforced with 30% glass fibres for electronics; V0 @ 0,4 mm

Tribological modified PA9T injection moulding grade reinforced with 30% glass fibres for gear wheels and transmission parts

Heat stabilized standard injection moulding PA9T grade with 35% glass fibres

Easy flowing PA66+PA6 blend with 60% glass fiber reinforcement, heat stabilized, for parts with very high strength

Polyamide 6 injection moulding grade with 12% of carbon fibre reinforcement and conductive carbon

Heat stabilized injection moulding grade based on a partially aromatic Polyphthalamide; Non-halogen flame-protected

Easy flowing, 30% glass fiber reinforced standard injection molding grade

Dry impact modified PA66 injection molding grade, good flow, easy demolding, fast processing

Isotropic, antistatic injection moulding grade based on PPA and PA66, for distortion-free, paintable components

Hochviskose Extrusionstype für flexible Schläuche

PA6.10 injection moulding grade with 30% glass fibres

10% carbon fibre reinforced, impact resistant modified PA612 for injection moulding utilisation; Outstanding mechanical characteristics; Electrically conducting

30% glass fibre reinforced PA612 for injection moulding; outstanding mechanical characteristics, impact resistant modified

50% glass fibers reinforced, heat stabilized injection moulding grade based on a polyphtalamide

30% carbon fibre reinforced PA12 grade for injection moulding or extrusion, electrically conductive

PA6-PP blend, medium viscosity, extrusion grade, for flexible pipes

UL listed, easy flowing injection moulding grade with short cycle times for technical products with isolating properties

flame retardent (red phosphorus), 25% glass fibres reinforced and heat stabilised injection moulding grade with excellent electrical properties

20% glass fibre reinforced Polyamid 6 injection moulding grade with excellent mechanical characteristics

Heat-stabilized and 50% glass fibre reinforced injection moulding grade based on apartially aromatic polyamide

Heat-stabilized and 60% glass fibre reinforced injection moulding grade based on a polyamide blend; manufacturing without ADN and PA66

with 33% glass fibre reinforced polyamide 612 injection moulding grade

50% glass fibre reinforced PA612 resin for injection moulding

45% glass fibers reinforced, high heat stabilized injection moulding grade based on a polyphtalamide, hydrolysis resistant

Heat-stabilized and 60% glass fibre reinforced injection moulding grade based on a partially aromatic polyphthalamide and PA66

flame retardant injection moulding grade with medium viscosity and good electrical properties; blended Nylon 66 and Nylon 6

Halogen and phosphorus free flame retardant injection molding type with high heat stabilisation i.e. for electrical components

Mineral filled, flame retardant PA12 injection moulding grade with adjusted shrinkage properties

10% carbon fibres reinforced, heat stabilised injection moulding grade for components with high stiffness and good electrical properties

Polyamide 6 injection moulding grade with 30% carbon fibre reinforcement, for technical parts with high strength

Heat stabilized injection moulding grade based on PPA for tribological applications

Injection moulding grade based on a blend of a partially aromatic copolyamide and PA12; antistatic and optimized shrinkage grade

Non halogenated, (red phosphorus and antimony free) flame retardant, 35% glass fibre reinforced injection moulding grade, UL94 listed

30% glass fibre reinforced and heat stabilized PA612 resin for injection moulding

Unfilled PA6.10 injection moulding grade

15% carbon fibre reinforced PA12-injection moulding grade, antistatic. Also suitable for filament extrusion.

Non halogenated, (red phosphorus and antimony free) flame retardant, 20% glass fibre reinforced injection moulding grade, UL94 listed

Polyamid 6 injection moulding grade, dimensionally stable due to 20% glass beads, with 20% glass fibres

PA12 injection moulding grade with 30% glass fibre reinforcement, heat aging stabilized, suitable for laser-markable components

UL listed, 30% glass fibre reinforced injection moulding grade with excellent mechanical properties

40% glass fibre reinforced standard injection moulding grade with excellent mechanical characteristics

injection moulding grade with 30% glass fibre reinforcement, UV stabilised, halogen free flame retardant

45% glass fibre reinforced, heat stabilized injection moulding gradebased on a PA6/6T, tribologically modified

PA12 injection moulding grade with 30% glass fibres

Easy flowing injection moulding grade, heat stabilised

Injection moulding grade; 30% glass fibres; heat stabilised

Polyamide 6 injection molding grade, 25% glass fiber reinforced, flame retarded based on halogens

60% glass fiber reinforced PA66 injection molding grade, heat stabilized, for parts with very high strength

PA6 injection moulding grade, 15% glass fibre reinforced, impact resistant modified

30% glass fibres reinforced, halogen free flame retardent injection moulding grade with superior mechanical properties

UL-gelistete Polyamid 6-Spritzgusstype

Impact resistant modified, with 25% glass fibre reinforced injection moulding grade

30% glass fibre reinforced PA66 injection moulding grade, flame-protected without halogens, red phosphor and antimony trioxide

unverstärktes, mittelviskoses Polyamid 12, tribologisch optimiert mittels Molybdänsulfid

PA6 injection moulding grade with extra low viscosity, filled with 30% glass beads

UV stabilised PA12 injection moulding grade with carbon fibres and glass fibres for electrically conductive articles

Heat Stabilized, 40% glass fibers reinforced injection moulding grade based on a polyphtalamide

Injection moulding grade with 15% carbon fibres and with PTFE for tribological applications

50% glass fibers reinforced, heat stabilized injection moulding grade based on a polyphtalamide

Injection moulding grade; 30% carbon fibre

25% glass fiber reinforced PA66 injection molding grade, flame retarded with red phosphorous, heat stabilized, good electrical properties

Non-halogen and phosphorus-free flame-retardant injection moulding grade with excellent flowability and good electrical characteristics

heat stabilised injection moulding grade with high tough modification

30% glass fiber reinforced PA66 injection molding grade, heat stabilized, suitable for food contact

Light-flowing polyamide 6 injection moulding grade, reinforced with 10% carbon fibres and 30% glass fibres for technical components with high stability

35% glass fiber reinforced PA66 injection molding grade, stabilized against hydrolysis

Impact modified PA66 injection molding grade, 15% glass fiber reinforcement, for technical parts with high stiffness and toughness